Detection and Automatic Programming Sensors!
What major problems of conventional alarm systems?
It can easily be disabled, just off the phone line accessible from outside. The alarm is triggered, the siren rings but no call is made. The security company and the owner never know of the occurrence (unless someone in the neighborhood worry about the noise ...)
The solution is to have a fully independent and inaccessible from the outside: The alarm system for GSM!
Because it uses the GSM network as a phone, the alarm can not be stopped cutting a wire from the outside, because you always have access to the telephone network.
When the intruder / fire / broken glass is detected, sequentially performs a call for a list of 6 numbers pre-set and sends a text message (SMS) to warn that the area was detected alarm. After detected the alarm, call the first number in the list, if no one answer in 40 seconds or is off, the following is the list and so on until you return to the first.
The GSM alarm security system has an internal battery of high autonomy, which in case of electrical failure, still active and report any incidents up to the load (about 24). The sensors also work on batteries, avoiding thus the deactivation in case of lack of electricity.
This system doesn't need to install any telephone, cable or transition specialist! The concept is "Do it Yourself"! Extremely simple to install, the GSM alarm security system can be placed anywhere in the house / store, provided that no more than 100m from the sensors, without any interference.
Just needs a SIM card, as a mobile phone, to make and receive calls!
The system can be armed / disarmed of 3 ways:
1. Locally, enter/ exit the house / store by the (2) remote controls provided
2. Remotely, with a call to the alarm
3. Remotely, with an SMS message to the alarm
At any time, whether or not an alarm occurs, you can:
- Listen to what is happening within the housing with the high sensitivity microphone built into GSM alarm security system
- Disconnect / Connect the siren
- Arm / disarm the system
This kit is sold with a motion detector 110 and the opening of a door / window already programmed. You can buy more sensors in selecting "Options" below, which will be delivered have also pre-programmed with the plant. The sensors are completely wireless, no need to switch from cable to the central sensors.
2 remote controls are provided which can arm / Desarme the alarm button and have an emergency / panic that immediately triggers the alarm (siren active, make calls and send SMS) available 24 hours a day, even with the system disarmed. Thus, a person in danger or crisis can immediately trigger the alarm in case of emergency.
Has 99 areas of defense, 3 Emergency and 1 can be disarmed separately:
- Each sensor or set of sensors is assigned to each area as desired. So, if for example you have a motion sensor in the garage area assigned to 7, will receive an SMS to warn that the area was 7 that the fire alarm, telling where the intrusion occurred.
- The sensors assigned to the area of emergency (may be fire, broken glass, moving or opening doors / windows) when the fire alarm, activating the siren and making calls and sending SMS. Thus, if you forget to go out and arm the alarm, the system ensures that you will be informed in case of a fire or an entry into a prohibited zone / delicate 24h a day.
- Partial alarm - you can disarm an alarm zone separately by remote control, leaving the remaining armed. For example, assign all of motion sensors to a zone. At night, when you click on the partial alarm, it disarm motion sensors so that people can move into a house without activating the alarm, BUT the other areas remain armed. If there is an open door / window, broken glass or fire the alarm will be triggered in the same. Nobody can enter / exit without triggering the alarm.
Kit GSM features:
- Uses the GSM network, needs no fixed telephone line
- Inability to turn off the outside
- Call the phone /mobile phone to warn that there was an alarm
- List of 6 phone numbers / mobile programmable
- Allows 99 independent zones could be desarm totally or partly
- Send a text message with the information that the fire zone alarm
- Internal battery high capacity - operating without electricity until 24h
- Two way communication / full-duplex (receive and make calls)
- Informed by SMS if the power failed and when it was restored to ensure that the user knows that the battery is operating
- High-sensitivity internal microphone to listen to what is happening inside the housing
- Possibility of Silent Alarm (siren off and only make calls and send SMS)
- Total long-distance remote control of alarm in any part through phone call or SMS
- Access protected by password, 4 digit for the control of long distance
- Lets you connect many types of wireless sensors: movement (single, double blind, 360), opening doors / windows, broken windows, smoke / fire
- Stores a voice message of alarm to 10 seconds
- Possibility to connect to a network alarm with an identification code
- Time of the siren on after a programmable alarm in minutes, or always on
GSM Central with integrated programming and LCD ecran
2 remote controls with 4 buttons: arming / disarming total, partial arming, emergency / panic
Remote keyboard configuration
External high-power siren
PIR Motion Sensor w / wall support
Sensor opening of door / window magnetic
High power internal GSM antenna
GSM Central - Transformer 100 ~ 240V AC
Recognize voice instructions
Compatibility with monitorition emergence central (GPRS)
Embedded transmitter: 433MHz
GSM Frequency: Dual band and Quad band: 900/1800/1900 MHZ
Current in stand-by: <40mA
Current in alarm: <350mA
Scope of operation (sensor-core): up to 100-150m in open field
Temperature Range: -10 to 50 ° C
Relative Humidity: <90%
We have special prices for Shops / Companies / Retailers!
Weight: 1280 g